Screw compressor plants in modular container design are widely used.
Manufacturer: OJSC Kazankompressormash
Compressor fault detection .
Cleaning the inner surfaces of the flow path of the cylinder block, oil tank from soot dirt, rust.
Replacement of all rubber, PTFE sealing rings, membranes and cuffs.
Replacement of all support and thrust bearings.
Replacement of Belleville springs, spacer rings.
Measuring the geometry of the working screws.
Restoration of working journals for bearings with their subsequent grooving and grinding. If it is not possible to restore the necks, replace the screws with new ones.
Restoration of the ends of the cylinder block housing, if restoration is impossible, replacing the housing with a new one.
Oil sampling for oil analysis, if the analysis does not comply with the standards, oil change.
Replacement of filter elements for fine and coarse oil cleaning.
Replacement of air filter elements.
Replacement of oil filter elements.
Repair of starting and working oil pumps.
Adjustment and calibration of pressure loading valve, suction valve, emergency valve.
Exposure of axial end clearances at suction and discharge, selection of spacer rings.
Cylinder block alignment with electric motor.
|min inlet pressure||bar||1|
|max working pressure||bar||7|
|Productivity||m3 / min||50|
|Dimensions||mm||8210 / 2760 / 3840|
Screw compressor plants design are widely used in modular container , including: for compressing petroleum gas of the last stages of oil separation, for compressing flare gas at oil and gas processing plants, for transporting associated petroleum gases, for collecting and compressing associated petroleum gas at oil fields