Compressors

Designed to compress atmospheric air used in various industries in pneumatic equipment, pneumatic tools and technological processes.

Designed to compress atmospheric air used in various industries for pneumatic equipment, pneumatic tools and technological processes.

The centrifugal compressor oxygen plant 4GTs1-250 / 5 is designed to compress oxygen with a concentration of up to 100% in various technological industries.

The centrifugal compressor K1500-62-2 is designed to compress and supply primary air to oxygen separation units.

The compressor is single-cylinder, six-stage, and consists of three sections. For the compressor, a step-up gearbox of the RTSOT-320-3.64-1 type is used.

The centrifugal compressor K400-51-2 is designed for compression and supply of contact gas for dehydrogenation of isopentane and isoamylenes in the production of synthetic rubber.

The KTK-12.5 / 35 compressor is mainly used in the chemical and metallurgical industries. It is also possible to use it in other industries in the event that the working conditions necessary for this technique are observed. It is used to compress oxygen in a gaseous state.

Compressor KTK-7/14 is designed to compress oxygen in a gaseous state and move it. It is widely used in the metallurgical and chemical industries.

Screw compressor plants in modular container design are widely used.

The compressor unit TsK-135/8 is a centrifugal two-case six-stage machine with external air cooling in two intermediate and one end water cooler.

Compressor type К500-61-1 is designed for the compression and supply of industrial air.  For the compressor, a step-up reducer of the RC type ET-350-2.55-1K

Screw air compressors are equipment used in various fields of industry.

Large medium speed units designed to operate in tandem with electric and gas engines.

These are large Ariel medium speed reciprocating compressors that can handle heavy rod loads up to 150,000 lbs.

The centrifugal compressor type K345-92-1 is designed to compress air. Compressor - nine-stage, four-section.

The blower is designed to suck gas out of coke ovens and supply it through the gas pipeline network to the equipment for trapping chemical products.

The blower is designed to compress and supply air and other gases (as agreed with the manufacturer).

Centrifugal blower type 540-41-1 is designed to compress nitrous gas and supply it to the production line for the production of weak nitric acid.

Supercharger type 650-21-2 is designed for compression and transportation of natural gas through main pipelines.

The blower is designed to suck gas out of coke ovens and supply it through the gas pipeline network to the equipment for trapping chemical products.

The blower is one-stage, with a cantilevered impeller and axial gas supply.  The blower housing is cast from cast iron and is a non-diffuser volute with a horizontal split.